Profile image

RJ Rebel Point Interceptor 2.6

234k RamboJutter  3.2 years ago

Introduction

Everyone has seen the German Natter rocket interceptor, so here is my RJ equivalent in use by the British to fend off pesky German bombers attacking airfields etc.

Controls (quite important you follow this bit)

Takeoff sequence > Full throttle > AG2 (basic reheat) > fire off all rockets (in ground attack menu > AG1 to release

AG4 releases rocket pods

Landing sequence > keep at least 20% fuel > fly horizontally to where you want to land > pitch vertically up with 0% throttle > when speed is less than 20kts press AG7 > decend gently on the parachutes > when low enough apply full throttle to arrest the descent (use AG2 to assist if needed) > touch down at less than 15kts > imediately on touchdown shut throttle and repress AG7 to release chutes

Pictures

Ready for takeoff
1

Takeoff!
2

Jettison rocket pods
3

On the chutes
4

Landed (and just released the chutes)

5
6

General Characteristics

  • Created On Windows
  • Wingspan 26.2ft (8.0m)
  • Length 26.2ft (8.0m)
  • Height 38.8ft (11.8m)
  • Empty Weight 110,491lbs (50,118kg)
  • Loaded Weight 110,910lbs (50,308kg)

Performance

  • Power/Weight Ratio 0.151
  • Wing Loading 431.2lbs/ft2 (2,105.3kg/m2)
  • Wing Area 257.2ft2 (23.9m2)
  • Drag Points 1770

Parts

  • Number of Parts 435
  • Control Surfaces 0
  • Performance Cost 1,541