The Al-Asad III is the work of thousands of hours of painstakingly hard work just to design its hull itself...
Nah, JK, this is the most advanced amongst the other Al-Asads, the thing is reasonable with its speed, armour of 300mm of Graphene + 5 Air Pockets + Aluminium to enable to survive much more punishment from other enemy MBTs, and firepower. The Gun used is a 160mm RailGun/PlasmaCannon that uses a lot of non-lethal rounds like EM Shells to conquer the battlefield without casualties from either side. It has, however, APCRs, HEP and HEAT shells for close range combatment, where it is a little dull in its performance. Still, it still can hold its own ground after being hit by thousands of shells. It is controlled by either an AI Module, RC Controller or by a tank crew
Specs:
Dimensions: Refer Properties
Weight: 40 Tons
PowerPlant: 2000hp 1500ftlbs Electrode Motor + EM Battery
Speed: 80mph
Traverse:
Track: 30*s
Turret: 45*s
Gun Depression / Elevation: 15*
Suspension: Christie Suspension
Armour [Not Including Sloping]
All Sides: 300mm Graphene + 5 Air Pocket + Aluminium = 1200mm of armour
Weaponry:
Main Armament:
160mm RailGun: 6000mm at extreme ranges with APCRs, 4575mm with HEAT, and HESH, 1250mm and EMP strike with EMs, 8s per shot
or
160mm PlasmaCannon: 1250mm of penetration + Explosion, 7.5s per shot, 10s cooldown every 10 shots
Secondary Armament:
TeslaCoil: 100m radius, 5000*C, 500A, 5V
or
20mm Minigun: 20 rounds per second
Controls:
VTOL + Trim for throttle
AGI + Roll for Turret Traverse
AGII + Pitch for gun elevation/depression
AGIII for Main Gun
AGIV for Secondary Gun
AGV for lights
Cameras:
I for MainGun [First Person]
II for MainGun [Chase View]
III for MiniGun
IV for Commanders Cupola
V for Navigators Cupola
VI for Driver Binoculars
VII for MainGun [Facing Cockpit]
Specifications
Spotlights
- Pilotmario 8.3 years ago
General Characteristics
- Created On iOS
- Wingspan 21.3ft (6.5m)
- Length 41.4ft (12.6m)
- Height 18.1ft (5.5m)
- Empty Weight 14,317lbs (6,494kg)
- Loaded Weight 15,061lbs (6,831kg)
Performance
- Wing Loading 4,713.3lbs/ft2 (23,012.6kg/m2)
- Wing Area 3.2ft2 (0.3m2)
- Drag Points 16535
Parts
- Number of Parts 311
- Control Surfaces 0
- Performance Cost 1,116
Yup... They Did :\ @MemeKingIndustriesAndMegaCorporation
@Supermini555 Pilot Mario and PINK love to clutter comment sections....
Ok @MemeKingIndustriesAndMegaCorporation
Mashallah! This is very beautiful
@Supermini555 look at IStoleYourMeme 's uploads. And you'll see a roundel pack. We use the Saudi One
Thing is, I can't find the Awwami Roundel, @MemeKingIndustriesAndMegaCorporation
Can you submit one to me?
lol @Pilotmario
I can only think of two examples that don't have torsion bar suspension.....K-2 and Type-10. @Pilotmario
@PINK Most modern tanks.
Not all moden tanks...... @Pilotmario
@Supermini555 Finally! An Awwami light tank!
Also, I suggest the use of Torsion bars. They take up less space inside the tank. That's what all modern tanks use anyways.
@PINK I see.
Our designers noted the requirments for the aircraft, and have settled on making a new version of the FL-22. @Pilotmario
Im making another tank while you're making it, An-Namr Saghir III LT Recon
Yes, but use different technology for guns @Pilotmario
But better sloping could be made. Permission to make own version? I will link you and tell you what I changed. @Supermini555
But they lack a turret...
Hetzers are better for their armour effectiveness @Pilotmario
While this is a better design than other machines in service, there are several flaws, notably the poor frontal armor geometry and the lack of a machine gun that can be operated internally.
Whatever flies your jet. @PINK
We don't consider it satisfactory for an strike role. Also....we are going to use the nacelle set up that is seen on the FL-22A. @Pilotmario
Su-35. If you want an F-14/15 hybrid, there's my F-9B. @PINK
\/
\/@Pilotmario
We can just use FL-22As to smite thier production facilities. @PINK
I am debating building a F-15/F-14 hybrid or a Su-35 style strike fighter for the NFK. We want two engines. @Pilotmario