HB3 SL V12
Holy moly!!! Look at this! This is the HB3 SL V12. It is a little bit different to my previous rocket, the HB2 Starship. The controls are the same. Before you take off, AG1 then throttle up to 100%. This rocket was made to withstand altitudes of a little over 200,000 feet if you take off with the afterburners. When you reach 10,000 feet, yaw to the left to spin the rocket. This will take you over water at any location. When the rocket slows WAYY down, at around 200,000 feet, throttle to 50%. When you drop to 60,000 feet, reduce throttle to idle. Then carefully "reverse thrust" your way down to the water. You should be coming to it at around 300 mph or below. WARNING, WHEN YOU'RE DROPPING, DONT HOLD THE THRUST FOR TOO LONG OR YOU WILL CLIMB INSTEAD OF DROPPING. Anyways, HAVE FUNN!!!!!!
Specifications
General Characteristics
- Created On iOS
- Wingspan 24.6ft (7.5m)
- Length 23.0ft (7.0m)
- Height 48.4ft (14.8m)
- Empty Weight 115,511lbs (52,395kg)
- Loaded Weight 252,985lbs (114,752kg)
Performance
- Power/Weight Ratio 2.878
- Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 84946
Parts
- Number of Parts 64
- Control Surfaces 0
- Performance Cost 1,364