thanks to TUCAN for the wonderful screenshots!

history

The TLV-M RM-1 is a heavy tank designed by the US military during the late stages of ww2. The design is heavily based off of the german Tiger 2 tank, and comes with a powerful 85mm cannon. The tank never got out of the prototype phase as the war ended 8 months after its initial design. A total of 5 tanks were ever produced, and all were scraped.

controls

Pitch+roll- turret controls
Yaw- tank turning
Ag1+Pitch- turn on engine ( go full on pitch and then release so you dont need to keep pitch pegged, and is required with how the turret is used)
Ag2- rear engine hatch
Ag3- activate AP rounds
Ag4- activate HE rounds (best if you take off ag3 when ag4 is activated and vice versa for ag3)
Ag5- activate turret mg (trim and VTOL for movement)
Ag6- activate hull mg (pitch and roll for movement)

how to operate + things to keep in mind (MUST READ!)

1. Press ag1 and pitch up, and once you start moving deactivate ag1 and then pitch down to help bring the gun back to its stock position. The way the turret is operated the barrel will go down when you pitch up so after disabling ag1 make sure to pitch down to get the barrel to come back up so it can operate properly
2. Activate ag3 or ag4 to get HE or AP rounds, if you go into the tank you can see the HE and AP rounds In there holds, HE is signified by the red tip of the shell
3. There is a gun stabilization system so taking mild jumps and going over rough terrain will not effect your shots to much
4. The hull rotates slower than the turret so you'll need to keep that in mind if your trying to keep a lock on an enemy and your turning as well
5. This is the first tank I posted that sports an interior so I'm sorry If there are some things missing
6. Top speed is 23mph so your not going to be going anywhere to fast

gallery

builders note: this tank was alot of fun to make and I'm so happy on how it turned out!

thanks to those who upvote, comment, and follow