This right here is a flying beast called the Ausmerzer. It’s from a video game called “Wolfenstein: The New Colossus”. This was built by the Nazi regime in 1951, and was used to take down rebellions. Only problem is, Nazis are horrible engineers, and this thing has 3 main thrusters, rather than 2 or 4. I need help improving the flight performance and stability on this thing.
ONE WHO DOES THE BEST JOB GETS 10 UPVOTES AND CREDIT IN THE FINAL PROJECT.
Specifications
General Characteristics
- Successors 1 airplane(s)
- Created On iOS
- Wingspan 88.3ft (26.9m)
- Length 136.8ft (41.7m)
- Height 38.5ft (11.7m)
- Empty Weight N/A
- Loaded Weight 222,127lbs (100,755kg)
Performance
- Power/Weight Ratio 2.701
- Horse Power/Weight Ratio 0.004
- Wing Loading 35.2lbs/ft2 (171.9kg/m2)
- Wing Area 6,309.0ft2 (586.1m2)
- Drag Points 152162
Parts
- Number of Parts 349
- Control Surfaces 10
- Performance Cost 1,993
Here you go!
@Brendorkus I think I tagged you in it. I’ll send a link over though
I can’t find it, could you send me a link? @Mustang51
Fixed it and it’s uploaded
It’s close, there’s some propellers so it may not be totally accurate. @Flash0of0green
@Brendorkus is the center of lift right on top of the center of mass or close?
I used 4 gyroscopes at 75000% stability. And no matter how many inlets I put on, the back engine doesn’t get enough air. Causing me to have to alter all the engine’s power multipliers by very specific numbers. @Flash0of0green
@Brendorkus dose the back thruster tilt with the front too and did you add thrust force to the back thruster so it matches the thrust force of the front too? kus if you did it should be stable. all you would need to make it more stable if you did would be to add a gyro.
This should be quite a simple fix: you just need to add a very strong Gyroscope which has the ability to both keep the aircraft upright as well as help it roll slightly. To be fair I haven’t tried it yet but from the sound of the problems, it should work like this
I need help with flight performance. @DPSAircraft