Industrial Transport Truck
Industrial Transport Truck
For mobile, go here: https://www.simpleplanes.com/a/t29Kp1/Transport-Truck-For-Mobile
Here is my take on an 18 wheel industrial transportation truck. It is my largest build ever with 824 parts. And if I get enough people like this (by downloads and upvotes) then I will post the truck base so people can build there own truck off a working base. It also is fully equipped to go off road! Enjoy!
Before Driving, Please Read The Controls
Features:
>Working Windshield Wiper
>Detaching Flatbed
>Headlights
>Brake Lights
>Hazard Lights
Controls:
>Act. Group 1 for main engine
>Act. Group 2 for secondary engine and detachment of flatbed (only do this when you are at low speeds or stopped) When braking with only the front, do it very gently (in taps) so you do not flip.
>Pitch for forward and backwards
>Roll for turning (please do not violently roll to turn, as this will result in a flip)
>Landing gear for hazards
>Mirror light and spotlights turn on automatically
>Brake to turn on brake lights
Enjoy! Thank you!
Specifications
General Characteristics
- Predecessor The Hidden Decimator
- Successors 1 airplane(s)
- Created On Windows
- Wingspan 12.1ft (3.7m)
- Length 61.7ft (18.8m)
- Height 13.6ft (4.1m)
- Empty Weight 29,874lbs (13,550kg)
- Loaded Weight 31,515lbs (14,295kg)
Performance
- Wing Loading 1,301.3lbs/ft2 (6,353.3kg/m2)
- Wing Area 24.2ft2 (2.3m2)
- Drag Points 16055
Parts
- Number of Parts 824
- Control Surfaces 0
- Performance Cost 2,513
Heeh@Joco80
@Turkie1 Hmn, look in the successors...
İm play a android :(
Thanks! @Warbrine
Thanks!
@Dllama4
Thanks!
@WilliamBoeing
@Joco80 no problem at all
@MAHADI Thanks you very much!
Nice...
Thanks @AfterShock
@AV8R Thanks
@AV8R Yes, that will be in the next version, if you want help we can collab on that part, but all you need is a scaled detacher, floppy hinge with a set angle of about 25 degrees and a .25 by .25 fuselage to connect to.
Cool build, I haven't tried to make a land vehicle yet. Is it possible to make the trailer swivel (instead of staying rigid) like an actual semi?
Thanks @Gazpacho997
Np @Joco80
Thanks @ChasingHorizon
Thanks @Supermini555
Thanks! @Leonelarminrocks7
:o
Ya, I might just release it tonight either way... @Sparrow007
@Joco80 I wish you get more upvotes
@Sparrow007 Thanks, if i hit 25 upvotes, i will post the base so anyone can build a truck with a complete front...
@Joco80 No problem! Nice build!
Thanks @Sparrow007
@Joco80 np!