Simple V-22 Osprey made from just a few parts in the normal editor. It has the same dimensions as the actual Osprey and flight model wise it seems to be quite accurate too.
Use action group 1 to activate the VTOL Gyro and Prop angle rotators.
Afterwards, use Trim to change the prop angle. Forward trim to pitch the props down and backwards trim to go back to VTOL.
You need about 70% to hover and only 75% to do a VTOL take-off. The Osprey can VTOL descend on 60%, below that it might get a bit unstable.
Oh, and just be aware that Autopilot isn't that great on this plane.
Specifications
General Characteristics
- Successors 1 airplane(s)
- Created On Windows
- Wingspan 84.6ft (25.8m)
- Length 62.2ft (19.0m)
- Height 20.4ft (6.2m)
- Empty Weight 26,275lbs (11,918kg)
- Loaded Weight 26,275lbs (11,918kg)
Performance
- Horse Power/Weight Ratio 0.228
- Wing Loading 36.6lbs/ft2 (178.5kg/m2)
- Wing Area 718.5ft2 (66.8m2)
- Drag Points 20088
Parts
- Number of Parts 63
- Control Surfaces 4
- Performance Cost 384
pretty good