Profile image

moon rover challenge (for ios and non mod users)

2,539 squideater56  7.0 years ago
Auto Credit Based on squideater56's moon rover challenge

So in this challenge you must build a rover that can work under low gravity, im using a mod map for this so the vehicle will go under the real stress of low grav.
Rules:
Vehicle cannot use thrusters for downward thrust, they dont work on the map.its only low grav, so your vehicle wont float away

Vehicle is "unmanned", make your cabin either on a seperate platform or seal the cabin within the rover, out off sight

The vehicle must be able to take an impact force of at least 40mph and not break, the vehicle will be jumping off the moon base and must take the impact in order to move on

This vehicle in post will be the benchmark rover to compare with

The vehicle will be rated by these specs:
Survivability: how much can it take before breaking? 0/10

Speed: how fast can it move across the surface? 0/10

Manuverability: how well is it at keeping to the ground? 0/10

Design: was it just thrown together or did you really built it with effort for maximum functionality 0/10

Extras: what else did you add, any special parts, rock claw? Solar panel? Flag planter? You decide

The 1st place winner will recieve a spotlight (if possible) and 3 upvotes. 6 upvotes if spotlight is not available

2nd place gets 3 upvotes

3rd gets 2 upvotes

All people who perticipates in this challenge will get 1 upvote for effort and joining in

Vehicle MUST be an succsessor

General Characteristics

  • Predecessor moon rover challenge
  • Created On Android
  • Wingspan 14.6ft (4.4m)
  • Length 22.9ft (7.0m)
  • Height 8.2ft (2.5m)
  • Empty Weight 5,054lbs (2,292kg)
  • Loaded Weight 7,048lbs (3,197kg)

Performance

  • Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
  • Wing Area 0.0ft2 (0.0m2)
  • Drag Points 4776

Parts

  • Number of Parts 128
  • Control Surfaces 0
  • Performance Cost 456