No Tags
So I've been messing around with the beta realease and I think I finally built something I'm happy with. Use about 80% thrust for initial take off. Use pitch for forward and backward controls. Use yaw for turning and pitch to stabilize. Please rate, comment, and have fun!
Specifications
General Characteristics
- Successors 2 airplane(s)
- Created On Mac
- Wingspan 34.4ft (10.5m)
- Length 38.4ft (11.7m)
- Height 13.0ft (4.0m)
- Empty Weight 12,469lbs (5,656kg)
- Loaded Weight 15,231lbs (6,908kg)
Performance
- Power/Weight Ratio 1.77
- Wing Loading 50.4lbs/ft2 (246.3kg/m2)
- Wing Area 301.9ft2 (28.0m2)
- Drag Points 12999
Parts
- Number of Parts 290
- Control Surfaces 0
- Performance Cost 770
- Log in to leave a comment
-
842 Legomoreit looks amazing. wish i had beta though...9.8 years ago
-
5,241 XWINGAlright posted new version and it flies way better thanks!! @WeeBabySeamus9.8 years ago
-
5,241 XWINGgotcha thanks so much! @WeeBabySeamus9.8 years ago
-
Dev weebabyseamusUsing the top view image as reference, Connect the rotator roll mechanism where the small jet engine touches the yaw rotator block, and make sure they aren't touching anything but each rotator block and mount the new rotator block to the fuselage as the base for blades9.8 years ago
-
5,241 XWINGHey thanks so much for the tips I don't really understand what you meant with the other rotator but I get the VTOL placement. If you would Id appreciate you posting your modded one so I can learn for the future thanks so much!! @WeeBabySeamus9.8 years ago
-
Dev weebabyseamusI like the way it flies, but I have a tip. I rebuilt this design to be able to work solely on the VTOL nozzles and no RCN. If you add another rotator attached to the Yaw rotator so it pivots on the back set to roll, you can make it roll from the rotation. Also attach the 4 VTOL Nozzles on the Blade housings.. I put one in the front on the inside, and one in the back inside on each side. then you have to balance the weight so the center is within the middle of the blades. hope that makes sense. I wont post the one I tweaked out of respect cause I rather you get the credit, but I assure you its possible.9.8 years ago
-
5,698 AceOfSpadeDangit you beat me to it!!!!!!!!!!!!!!9.8 years ago
-
13.5k DethFromAboveLooks epic!! Wish I didn't have to wait to fly it!!9.8 years ago
-
5,241 XWING@WeeBabySeamus thanks for the rate I put a lot of work into it and it actually flies pretty well9.8 years ago
-
Dev weebabyseamusLooks really good, hope it flies as good as it looks. Very good job on this man.9.8 years ago
