Profile image

XF-128b [Prototype v.2]

1,506 CmdrAlex  9.9 years ago
69 downloads
No Tags

This is my second version of my concept aircraft. It is still a prototype so it is not perfect. Pls make recommendations so that later versions(and hopefully the complete version) is at its best.

This Version pitches up rather down but it features slightly improved manuverabilty and a more fuel. This aircraft works best at medium to high graphics level. The aircraft tops out at around 880mph. It burns through fuel fairly fast so keep tabs on the fuel meter. It is fairly manuverable and it should get better in later versions.

Pls feel free to rate and comment. CONSTRUCTIVE critisim is asked for so please do make recommendations.

General Characteristics

  • Successors 1 airplane(s)
  • Created On iOS
  • Wingspan 29.3ft (8.9m)
  • Length 34.3ft (10.5m)
  • Height 10.5ft (3.2m)
  • Empty Weight 12,367lbs (5,610kg)
  • Loaded Weight 15,878lbs (7,202kg)

Performance

  • Power/Weight Ratio 3.113
  • Wing Loading 39.7lbs/ft2 (194.1kg/m2)
  • Wing Area 399.5ft2 (37.1m2)
  • Drag Points 2819

Parts

  • Number of Parts 89
  • Control Surfaces 8
  • Performance Cost 349
  • Log in to leave a comment
  • Profile image
    1,506 CmdrAlex
    Thanks @DnBMeister for the rating. :)
    9.7 years ago
  • Profile image
    1,506 CmdrAlex
    Thanks @XWING for rating it, working on a third stage now with the features you recommended. :)
    9.9 years ago
  • Profile image
    5,241 XWING
    So XWING here. I looked at your plane and with fifteen minutes of mods i made it fly extremly well. Here are some tips. First is the Center of mass, lift, and thrust. for a good plane M and L should be fairly close together and mid plane and thrust should be as far rear and center as possible. Next for most jets you will see large horizontal stabilizers i make my planes with them as well. They allow for much better pitch control. Lastly try looking at a real jet and make EXACTLY what you see to the last detail especially in the wings thats how to learn the ins and outs of jet making. Hope i could help and glad you liked my plane!
    9.9 years ago
  • Profile image
    1,506 CmdrAlex
    Thanks @mechasaurus for the rating. Remeber to post a recommendation if anything needs to be fixed or could be made better. :)
    9.9 years ago