This is a jet fighter in World War II, and it is also the work that I have made so far with the largest number of parts and the use of flight control functions, and roughly restores its configuration, In terms of armament, it is equipped with two 20mm MG151/20 cannons in the nose, which allows it to shoot down fighters and interceptor bombers with precision, in addition, there are ammunition counters in the cockpit instruments, which allow the pilot to save ammunition, but please Don't worry, the reserve is 600 rounds, which is at least double the amount in reality. In terms of flight characteristics, I used the flight control function. He162 has better maneuverability than other jets at low speed, especially when you open the flaps, the maneuverability is slightly attenuated at high speed. The PitchRate does not change much, but The turning radius becomes larger. In addition, the flight control function allows the aircraft to perform powered level flight at low altitudes without yaw or pitch autonomously, except at low speeds WARNING: This aircraft has the same thrust-to-weight ratio as a piston engine aircraft, please don't try to pull up quickly just after takeoff, if you do, your aircraft will stall very quickly and fall into an uncontrollable fall. This is very similar to the evaluation of the aircraft by pilots during World War II. In addition, if you have any suggestions on the flight control function, please let me know
Specifications
Spotlights
- Vincent 2.8 years ago
- Default4 2.9 years ago
- RussianAce 2.9 years ago
- CharlesDeGaulle 2.9 years ago
- Johnnyynf 2.9 years ago
- TheKugelblitz 2.8 years ago
- Username2 2.9 years ago
- XLZ 2.9 years ago
- JaeBeansS 2.9 years ago
- Tookan 2.9 years ago
- RolandTelmsFrossag 2.9 years ago
- EasternPatrick 2.9 years ago
- mikomiko 2.9 years ago
- FlyRaker 2.9 years ago
- Sakorsky 2.7 years ago
- TheCommentaryGuy 2.9 years ago
- Neruneten21 1.6 years ago
- Dragoranos 2.7 years ago
- Marulk 1.4 years ago
General Characteristics
- Successors 6 airplane(s) +70 bonus
- Created On Windows
- Wingspan 23.7ft (7.2m)
- Length 31.8ft (9.7m)
- Height 9.0ft (2.7m)
- Empty Weight 4,360lbs (1,977kg)
- Loaded Weight 5,246lbs (2,379kg)
Performance
- Power/Weight Ratio 0.389
- Wing Loading 36.8lbs/ft2 (179.6kg/m2)
- Wing Area 142.6ft2 (13.3m2)
- Drag Points 0
Parts
- Number of Parts 788
- Control Surfaces 6
- Performance Cost 3,183
Your work is awsome keep going
@KDnotSpy Thank you for your support,my next work is published.I'm sorry for the delay
Now that you are featured
When will we get more good shit?
good!
"69" Upvotes... Hm....
@ArthurPlayer oi
@Empanadim
@RolandTelmsFrossag Thanks for your support.
@lingcod Coincidentally, I have a semi-finished ta152c3, originally I was going to release it later, because I still have a yak3 to make, I will try to finish them at the same time
very nice
Could you make Ta152C？
@jangelelcangry Thank you for the great previous comment, I just couldn't resist mentioning the xml, it helped me a lot
@extraordinaryman OK, but I didn't had any issues with the brakes (landing gear).
@jangelelcangry The brake force can be modified in XML
Flights pretty good, stable braking and it looks awesome.
@CharlesDeGaulle @JaeBeansS thanks
Wow, well done, the best HE-162 of the site !!
nice work man
@CRATE52PART2 Historically this wooden plane crashed because of weak bonds, but in war thunder it was still a good plane, disintegrating at a high rate, and though it disintegrated at high speed or the flaps fell off, it recovered in the game The difficulty is not high, but due to the limited time and the friendliness of the players, I did not recover the speeding disintegration.
nice!
ahh yes the wooden jet fighter,
@Sorren Thank you for your good comment. This is the motivation for my creation. This aircraft has gone through an unimaginable number of test flights to become the current work, good control and fine appearance are equally important
It looks good, it controls well and it has a cockpit, which I think is very well made, good job, keep it up!