Thanks for everyone that Gave tips and helped me in this build!
Also, thanks for michele_romeo on Reddit, who requested the aircraft!
When i made my barely flyable mc202 somebody requested me to do a Re.2000, and since i wanted to make a decent Flying Italian, i did!
Its Stable while Flying, manoverable, and dosent stall when you Turn!
Imo theres just One small problem...
Since the Landing gear has a part to make the whell spin into the right position, its kinda hard to land and takeoff whitouth bouncing around... Sorry!
Take off!
for takeoff, i recomend that you dont use the flaps (VTOL) since that some how makes the plane Spin, also pay a lot of atention to the spinning of the airplane, and corect it whit the rudder. It much probably Will roll and hit its wing on the ground, but it Will be fine. :)
Landing!
For Landing i recomend that you aproach st around 190km/h. When close to the ground, gradualy cut the Trothle, and pull up a bit, Touch down speed should be around 150-160km/h.
Screenshots!
Have fun!
Specifications
Spotlights
- ChiChiWerx 3.8 years ago
General Characteristics
- Predecessor RE.2000 FALCO FM alpha
- Created On Android
- Wingspan 31.0ft (9.4m)
- Length 22.3ft (6.8m)
- Height 9.9ft (3.0m)
- Empty Weight 5,130lbs (2,327kg)
- Loaded Weight 5,766lbs (2,615kg)
Performance
- Horse Power/Weight Ratio 0.084
- Wing Loading 27.0lbs/ft2 (131.6kg/m2)
- Wing Area 213.9ft2 (19.9m2)
- Drag Points 1052
Parts
- Number of Parts 240
- Control Surfaces 9
- Performance Cost 873
@RaendyLeBeau thanks!
nice !!
bella !!
@Nintendo Thank you!
Cool! I found this through reddit
@ChiChiWerx thanks man, i was realy struguling whit that
Nice work here. Yes, using the default sideways traction settings of 90% on the main LG makes it nearly impossible to control on takeoff. However the fix is simple: Just reduce the sideways traction on the main wheels to 50% and it’s much more controllable. You can also experiment with raising the sideways traction on the tailwheel, which may also help, but the fix is simple.
doot