Title : ZSU-57-54(2)
Type : SPAAG

Short description

Anti-aircraft self-propelled unit. It has powerful, long-range, and destructive anti-aircraft guns, but a low fire density. This is partially compensated for by the radio fuse in the shells, but it does not save much.

control

Driving Mode(AG 1 off) :

Pitch = throttle.
Roll = hull turn.
VTOL = cannon elevation.
Yaw = turret turn.
Trim = Aiming speed control.
Brake = brakes.

Aiming Mode(AG 1 on) :

Pitch = cannon elevation.
Roll = turret turn.
VTOL = throttle.
Yaw = hull turn.
Trim = Aiming speed control.
Brake = brakes.

Ag 1 = Switch control mode.
Ag 8 = Switch horizontal stabilizator.

weapons

57 mm cannon x2(AACT-57)

Vertical Guidance Angles : -10/+75.
Horizontal Guidance Angles : ~.
Reload time : 1.5 sec.
Stabilization : 2D stabilization.

Ammo :

57 mm HE AA(SHN-57-HE-AA M)

Muzzle velocity : 1200 m/s.
Explosion charge : 0.200 kg.
Type : explosive.
Damage scalar : 0.4.
Explosion scalar : 0.4.
Radio fuse : Leading. Automatic.

Protection

Hull:

Frontal : Upper - 60 mm(60°). Lower - 60 mm(55°).
Side : 45 mm(0°).
Stern : 30 mm(17°).
Bottom/Roof : 20 mm/20 mm.

Turret:

Frontal : 60 mm(Rounded).
Side : 60 mm(rounded).
Stern : 60 mm(rounded).
Roof : 30 mm.
Gun mask : 0 mm.

Running characteristics.

Maximum speed : 54/-18 km/h.
Engine power : 520 HP
Weight of the tank : 37 tons.
Hull turning speed : (N/A) deg/sec.
Turret turning speed : (N/A) deg/sec.
Maximum angle of elevation : (N/A) deg.

some instructions

1. The guns have an independent synchronized vertical stabilization unit. If one gun's homing drives are destroyed, the other can continue firing.
2. The guns fire strictly in turn, and it takes both guns to reload. After a single shot, the guns will NOT be reloaded. You will be required to fire a second shot to reload.
3. The shells have a radio detonator. Be careful.

features

-Working exhaust.
-Dynamic suspension.
-2D stabilization.
-Aiming speed control.

Credits

@jeba - Gave the idea and provided the hull from a T-54. I optimized this hull by reducing the number of parts and used it as a basis for construction.