Profile image

Push Plane V3 (VTOL version)

2,985 Andrusky  8.9 years ago
53 downloads
Auto Credit Based on Andrusky's Push plane V2 (super stabilized version)

A VTOL version of my push plane. Extremly stable and manuverable in flight landing is a bit sketchy but taking off is extremly easy.
To take off throttle up and activate 1 once a little off the ground then put the vtol all the way up and activate 2 after about 5-10 ten seconds you can deactivate 2 for more stable flight but dont have to.
Landing is a little trickier the best approach is to turn both 1 and 2 on and bring the VTOL slider a little below the middle while at the same time having the throttle at about 50% and then once you are going about 20 mph move the VTOL slider to the middle and deactivate 2

General Characteristics

  • Predecessor Push plane V2 (super stabilized version)
  • Created On iOS
  • Wingspan 25.3ft (7.7m)
  • Length 54.0ft (16.5m)
  • Height 13.6ft (4.2m)
  • Empty Weight 4,585lbs (2,080kg)
  • Loaded Weight 8,772lbs (3,979kg)

Performance

  • Horse Power/Weight Ratio 0.319
  • Wing Loading 12.6lbs/ft2 (61.4kg/m2)
  • Wing Area 697.6ft2 (64.8m2)
  • Drag Points 2359

Parts

  • Number of Parts 58
  • Control Surfaces 16
  • Performance Cost 364