I wold but I have Amazon underground :(

use gyro if it is 1.6, it may help .....i put it in the center of mass you adjust it horizontal first, when it is centered align it vertically ..i am not sure but that's how i use gyro

@mrferretairlines well, it is hard to fix, it looks amazing ..but some how can't fly ...if the com/col/cot are right it will spin around it self

if the com is behind the col it will pitch up and lose control ....did you try to use gyro?

@mrferretairlines yea you are right i noticed that

Also the floating is wheels that have been scaled to the point of microscopy and the vertical engines have no thrust

I know I tried for two days trying to get it to fly @FennVectorCWA

Well i have tried everything, removing the extra wing, that fixed the COL
Adding dead weight and fuel in fuselages and making the COM go back and forth, didn't help, using one engine and placing it back and forth, didn't help... adding hidden(inside the fuselage) vertical stabilizer didn't help, adding visible vertical stabilizers didn't help combining all ways didn't help ...everything failed to fix it, you better remove the mod/glitch/ trick that allows this plane to move without gear ...hidden gear maybe? no collision maybe? i don't know ...remove it and mention me in an unlisted version so i can work on it like an unmoded plane without the vertical thrust engines ....so it would be basically COM in front of COL and COL behind COM and COL in front of COT and COT behind COL

This plane is aerodynamically wrong and even after applying simple planes aerodynamics guide, it didn't work so i am unfortunately telling you that you have to start from scratch again or remove the trick that allowed you to take off without gear..after that i can work

there is another problem, there isn't any actual vertical stabilizer, that's why it spins horizontally i am working on it , i will use a normal COM, COT and COL configuration

there is another problem, there isn't any actual vertical stabilizer, that's why it spins horizontally i am working on it , i will use a normal COM, COT and COL configuration

Now i know that there is an extra part, the number of parts in the middle is 16, the total is 75, 75-16=59....you need an even number so there is an extra part, the parts should be 58, after fine tuning parts back and forth up and down i have found the part i am talking about!
it is the left horizontal tailplane they were 2 wings (mirroring issue) after removal the COL are horizontally aligned at last, but still it doesn't take off properly....i failed, you have put too much effort in this and it looks great, but i have failed you, the COL and COM are horizontally aligned but nothing is fixed

at the end you built it but i didn't so you know better

so generally the problem is in the COL i will try my best to fix it, but you have better chance than me

one minor thing is the COM is little behind .. so i have removed the fuel in the last fuselage, to align the COM and COL on the same horizontal plane, but this isn't a huge problem and doesn't relate to the involuntary steering
The COM and COT are aligned perfectly on the vertical plane, the problem is ..COL isn't it is little bit to the left....you can notice it, so what caused the problem? you used fine tuning and a wing didn't mirror properly on the other side so it is creating lift on the left horizontal plane but it doesn't on the right horizontal plane....can i fix it? no i can't (but i will try), but you can and have better chance..by remembering that specific wing, if you don't know then that will be difficult, you have to remove it part by part and see where is that wing if you find it try to put it properly on both sides or remove it that's if it is not important part

i know what's the problem

i will try to fix it