This a Verticle take off variant of my Ground Striker aircraft (This is my first attempt at making a VTOL powered plane) To take off make sure you have Group 1 and 2 activated before you raise the throttle , Group 1 activates the Gyro to keep the plane level at all times and Group 2 activates the nozzles to adjust the yaw rotation while hovering (Use Q and E to rotate yourself to the respective direction). After reaching a suitable altitude move the slider up to stop hovering and start flying (After reaching about 250 mph horizontal you can deactivate the gyro and the nozzles). Group 3 activates flare countermeasures. NOTE: The yaw rotating nozzles will NOT work at medium to high speeds so if you are landing make sure you are below 200 mph or so for them to work