This is my "Mistel-5". It consists of two components: the upper Heinkel He-162, the lower Arado E377. The maximum speed in the coupling is about 1200mph.
How to take off on the coupler:
1. Activate AG-1 (lower component engines) .If this Do not, the coupler will turn over!
2. Raising the power to 100% to wait for a set speed of 400mph. When detaching at lower speeds, shaking will begin (but it is not so terrible as it quickly stops). After the speed set, take off as usual.
4. To reset the chassis, raise the nose and activate the AG-2 (if not to lift the nose, the truck will hit the lower component, which will lead to an explosion).
How to fly on the hitch:
1. The flight on the hitch occurs as on a conventional airplane.
Resetting the lower component:
1. Enter the shallow docking.
2. Activate AG-3.3. Smoothly get out of the peak and deactivate the AG-1. The lower component after the reset first starts to lift the nose, but after turning off the motors, it will suddenly drop it and cut into the ground. Explosion of the lower component is equivalent to the explosion of the Boom 500.