This looks weird so I will change how it look (maybe)
Specifications
General Characteristics
- Created On iOS
- Wingspan 9.0ft (2.8m)
- Length 23.8ft (7.3m)
- Height 14.6ft (4.5m)
- Empty Weight 3,861lbs (1,751kg)
- Loaded Weight 8,998lbs (4,081kg)
Performance
- Power/Weight Ratio 8.241
- Wing Loading 110.1lbs/ft2 (537.5kg/m2)
- Wing Area 81.7ft2 (7.6m2)
- Drag Points 3447
Parts
- Number of Parts 41
- Control Surfaces 0
- Performance Cost 388
Ok =)
@Hiimakeplanes Tag me if you EVER need me to work a a plane w you
@Hiimakeplanes Is this the plane we are working on ?
@Zaineman ok I’m gonna use it on another airframe this one looks better as a normal jet
@Hiimakeplanes you would be amazed how many times the rear of the plane is the culprit
@Hiimakeplanes Then the solution is in the rear section of the aircraft. You want a much taller vertical stabilizer. And test wider / bigger horizontal stabilizers !
PART 3 if your red dot is TOO far in front of the BLUE dot, the plane will not turn. You want to slowly slide the red dot closer to the blue dot. Each time you make an adjustment, you want to test fly to make sure the aircraft is still stable.
PART 2, another thing I do is as I build a brand new plane I glide it without engines yet on Wright approach. It has to glide correctly and turn correctly. now granted if you put engines in the back you will add alot of weight tomthe rear of the plane. Go back to your 3 circles and add dead weight.
@Hiimakeplanes PART 1 on the build screen, on the left, there is a button. It looks like a triangle with 3 circles above it. Press it. The red circle is the center of MASS, the blue circle is the center of lift, the yellow is thrust. YOU WANT TO keep the red circle IN FRONT of the blue circle. Ok ? You can do the by increasing "dead weight" (in settings when you click on a peice of Fuselage) in the front of the plane. You will see the red circle slide.
@Zaineman welll the problem is it likes to roll a lot
@Zaineman how do you make planes stable?