Profile image

S-22

4,475 paolops  6.4 years ago

Spy jet for go to anywhere with stealh capabilities. SPECIAL CREDITS FOR:
Vonteco VTV-2 thrust. ( https://www.simpleplanes.com/a/xcL002/VTV-2-Thrust-Vectoring-Engine ) thanks for amazing vectorial turbine!!! STEALH MODE: activate #1 and cut off the Throttle and flight in complete silence. Tips: stall speed 90mph, flaps in Vtol 🔽Down, speed brake in brakes. you can combine STEALH MODE with normal throttle percent for more speed. and remember disconnect the activate#1 for landing. Thanks: @texasfam04 -Psanford-

Spotlights

General Characteristics

  • Successors 1 airplane(s)
  • Created On Android
  • Wingspan 36.4ft (11.1m)
  • Length 40.6ft (12.4m)
  • Height 10.0ft (3.1m)
  • Empty Weight 9,693lbs (4,397kg)
  • Loaded Weight 9,693lbs (4,397kg)

Performance

  • Power/Weight Ratio 4.868
  • Wing Loading 16.4lbs/ft2 (80.2kg/m2)
  • Wing Area 590.5ft2 (54.9m2)
  • Drag Points 3236

Parts

  • Number of Parts 82
  • Control Surfaces 10
  • Performance Cost 553
  • Log in to leave a comment
  • Profile image
    15.3k Texasfam04

    Oh i think i know what you are talking about. When you mirror the "ROLL" rotator on the opposite side may need to be inverted. Same goes for the "YAW" rotator. If you need any help let me know and ill be glad to assist you.
    @paolops

    6.4 years ago
  • Profile image
    4,475 paolops

    @Jacobdaniel spy jet not bomber jet

    6.4 years ago
  • Profile image
    4,475 paolops

    @Texasfam04 my problem is in mirror the other turbine and fail direction in roll 😢 please tell me how to fix and build again with your configuration

    6.4 years ago
  • Profile image
    15.3k Texasfam04

    Flies amazing! its handling is really crisp and very responsive, i also like the design its very unique! One thing i would suggest if you choose to run a single engine is to deactivate the “roll” rotator. with only one engine it will pitch also when rolling. very cool plane !@paolops

    6.4 years ago
  • Profile image
    4,475 paolops

    @texasfam04

    6.4 years ago