Simple Chassis w/ 3 Speed Manual Gearbox
35.6k Delphinos
6.5 years ago
controls ;
- Roll, to steer,
- VTOL, to move forward or backward,
- Brake, for clutch,
- Trim, for gears
extras ;
- to change gears, hold the clutch first,
gear positions ;
- by default, the gear is at 3rd gear,
- full up Trim is 1st gear, up to 15mph,
- mid up Trim is 2nd gear, up to 20mph,
- middle Trim is 3rd gear, up to 30mph,
- down Trim is Neutral,
logs ;
- the first prototype was able to reach up to 30mph with first gear, and 60mph with second gear, but SP's physics hate us a lot, so we have to lower everything, and limit the speed to not more than 44mph,
Specifications
General Characteristics
- Created On Android
- Wingspan 24.6ft (7.5m)
- Length 31.2ft (9.5m)
- Height 7.2ft (2.2m)
- Empty Weight 7,551lbs (3,425kg)
- Loaded Weight 7,987lbs (3,623kg)
Performance
- Wing Loading 593.7lbs/ft2 (2,898.5kg/m2)
- Wing Area 13.5ft2 (1.3m2)
- Drag Points 9971
Parts
- Number of Parts 65
- Control Surfaces 0
- Performance Cost 500
We did it before @Cajunking13 but we have to change something back as, you know, SP's physic is so happy with it XD
@Cajunking13 i meant you should increase the traction on the gearbox wheels and it will reach 80
Almost the whole thing is XML-modded @Cajunking13 except the gearbox, which is a demonstration of a smaller size gearbox without XML-mod XD
@Delphinos you should xml the wheels powered by the engine with traction
Well, that engine and the the sphere is the only other parts which is a complete circle @ThePilotDude XD
Thank you super champ @RailfanEthan ;-)
Sweet beans