Profile image

Emptybox' Revo

10.2k emptybox  8.0 years ago
466 downloads
No Tags

i hope this gets even more attention than my previous creation because its just the same but better! Originally i wanted to build a very special vehicle for these new shocks i created but now i thought that this is just the right vehicle for them. take a look under the hood and watch the shocks move. these new shocks i present here are progressiv ( the standard shocks are linear) and i wanted them to look nice so i built a case around them. now they look like air shocks and thats the same way they behave. the revo can now take bigger jumps ´and bumbs without falling apart and exploding. i had a really hard time fine tune these shocks because its about 3 to 4 times more to think of than for normal shocks but finally i made it and they work great. if requested i will upload the shocks for themselfes in different strength and length

Spotlights

General Characteristics

  • Created On Windows
  • Wingspan 24.0ft (7.3m)
  • Length 16.7ft (5.1m)
  • Height 10.0ft (3.0m)
  • Empty Weight 6,160lbs (2,794kg)
  • Loaded Weight 6,426lbs (2,915kg)

Performance

  • Wing Loading 49.6lbs/ft2 (242.1kg/m2)
  • Wing Area 129.6ft2 (12.0m2)
  • Drag Points 6794

Parts

  • Number of Parts 573
  • Control Surfaces 0
  • Performance Cost 2,243
  • Log in to leave a comment
  • Profile image
    10.2k emptybox

    @Billybobjoe
    psssst thats my secret ;) but if you take them apart you will notice there is more then just the cover. How i said these are progressive shocks, wich means they get even harder when compressing. (1/2sD^2 Is the formula for the Energy of normal coil shocks. [s] is the travel [D] is the spring strength. Progressive shocks would have a formula like 1/2sD^3 or even a more progressive rate)

    7.9 years ago
  • Profile image
    2,403 Billybobjoe

    the new shocks you made they are just intakes covering the shocks right ?

    7.9 years ago
  • Profile image
    4,337 omkarp

    @emptybox no problem, Thank you though...

    7.9 years ago
  • Profile image
    10.2k emptybox

    @omkarp
    sorry i overread your comment. of course you can use it. im looking forward to see a nice build :)

    7.9 years ago
  • Profile image
    32.7k Wakescar

    Very cool design my friend! Great work with this suspension.

    8.0 years ago
  • Profile image
    10.2k emptybox

    @aircraftarsenal123
    Thanks! :)

    8.0 years ago
  • Profile image

    Ayyyy! Congrats on gold my friend!

    8.0 years ago
  • Profile image

    You should try making a summit or e-max, that would be realy cool

    8.0 years ago
  • Profile image
    8,812 Verterium

    I don't know much about shocks on RC cars, because I do drift RC cars. Either way, the suspension so far looks incredibly well done and seems to work really well. Great job on this!

    8.0 years ago
  • Profile image

    Progressive shocks are where its at! I used some on my stadium truck. This thing feels great to drive, awesome job!

    8.0 years ago
  • Profile image

    great !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    8.0 years ago
  • Profile image
    4,337 omkarp

    Awesome design!!...Hey can I use Its Body for my RC car please??? I'll give you credit for it when I'll post it...

    8.0 years ago
  • Profile image
    2,121 AnonyMoose

    epic man! it does indeed have a higher resistance than the last one..

    8.0 years ago