No Tags
I need some help on knowing where to start when making a plane. I know how, it's just I don't know where to begin. Enjoy this "thing". Throttle up, by the way.
Specifications
Spotlights
- BuiltBionixInd10 5.0 years ago
General Characteristics
- Created On iOS
- Wingspan 3.4ft (1.0m)
- Length 11.5ft (3.5m)
- Height 1.2ft (0.4m)
- Empty Weight N/A
- Loaded Weight 551lbs (250kg)
Performance
- Power/Weight Ratio 40.774
- Wing Loading 2.4lbs/ft2 (11.9kg/m2)
- Wing Area 227.0ft2 (21.1m2)
- Drag Points 7
Parts
- Number of Parts 12
- Control Surfaces 3
- Performance Cost 85
Thank you.
Get blueprint first, learn to scale it to real measures (1 block = 50cm) then start by the fuselage imho.
@randomdoggo
The fuselage is definitely the first place to start. I start with roughly the middle or slightly more to the front but behind the cockpit. I then add a bunch of fuselages (usually around 1 unit in length) on either side while making slight changes in their height and width until it’s the right length. Then further adjusting the length, height, and width of each fuselage block segment is a good place to go. I hope this helps but this post also would probably be better for forums. It’s more likely people will see it and give their input :)