Important
If you use this kit, do NOT make your airplane a successor -- save the parts you want as subassemblies, then import them to your build from there.
If you look at it from the same angles as in the images, the engines go up in power from the left starting from 1x, then 5x, 10x, 15x... 50x. The cylindrical fuselage blocks go up in mass scale starting from 0x at the left, to 5x, 10x, 15x... 50x. The first row contains a zero-mass inlet, a zero-mass fuel tank with 1 million gallons of fuel, a strengthened wing (it doesn't bend at high speeds) scaled down by 0.5x that can have control surfaces added, and finally, a zero-mass gun so you can add a crosshair to your entry without having to fix the mass distribution all over again.
All parts have collisions disabled, and all engines are quiet.
These parts are for my Level Flight Challenge, but can be used for any build. Credit is not required.
Specifications
General Characteristics
- Created On Windows
- Wingspan 180.4ft (55.0m)
- Length 114.8ft (35.0m)
- Height 29.5ft (9.0m)
- Empty Weight N/A
- Loaded Weight 879,799lbs (399,070kg)
Performance
- Power/Weight Ratio 0.421
- Wing Loading 1,277.1lbs/ft2 (6,235.5kg/m2)
- Wing Area 688.9ft2 (64.0m2)
- Drag Points 399340
Parts
- Number of Parts 83
- Control Surfaces 0
- Performance Cost 846
I was wondering if there was a way that you could make a version of the smallest jet engie but with like 1 100th(or as close to the thrust of what esentialy was an early jet engine that was on the p-51) of the power so i could use it in a project im working on@SledDriver
I made a jet that uses mostly these part @sleddriver
Ah thanks I didn’t see it@SledDriver
@Al3jandro6304 The power output goes from 1x to 50x. It's in the description.
What’s the difference on the engines other than sound
You mean like this? @chancey21
Like this@SledDriver
Ok great @SledDriver
@chancey21 OK, I'll give it a go when I have some time.
@SledDriver Just meme-ing it
Yes I'm saying you should make them out of fuselage blocks @SledDriver
@chancey21 That's not possible with inlet blocks. You can attach two inlet blocks back to back so that the openings face outward, but in the middle they'll be closed.
Yes but open on both sides @SledDriver
@chancey21 So a bunch of inlet blocks?
Something like This @SledDriver
@chancey21 So you mean simple cylindrical fuselage blocks in a bunch of sizes?
Like a PVC pipe @SledDriver
@chancey21 Do you mean single fuselage blocks in different diameters?
Like different sized ya know, like PVC pipes and Tubes of different thicknesses... like@SledDriver
@ACMECo1940 Thanks.
@grizzlitn Look forward to it.
@SoulDestroyer9 @Stingray @Maxwell1 Glad you like it.
@BaconEggs You don't like it?
@chancey21 It's a bit difficult to imagine what to include in such a set, because the number of combinations is so large. (Corner types, curve depth, length, width, height...). What would you like to see in such a set?
Cool