Omsk Class Rigid Airship
Basically, its a losgar III with a runway mounted on top. While takeoffs have been performed with the drone, no landings have been attempted.
Losgar III flight instructions apply.
Takeoff instructions: Set throttle to around 50 to 60% and wait for the airship to gain some altitude. Set the VTOL slider to around 50% up and start the propeller engines.
Cruise: Leave the autopilot on and make sure that it does not fall
out of the sky.
Landing: Reduce throttle and d wait for the airship to slowly descend. Ensure that the ground speed is close to 0 0 and reverse the propeller pitch if needed. Jettison bombs before landing at an altitude of at least 1000ft above the ground.
Be warned that if you get this off the ground, you will have a high chance of being rammed by anti airship extremists.
Some notes:
Collisions with the tail are survivable.
Being rammed in the nose may cause the front to fall off. Which should probably not happen because the front is not designed to fall off.
Specifications
General Characteristics
- Created On Windows
- Wingspan 113.4ft (34.6m)
- Length 596.7ft (181.9m)
- Height 86.7ft (26.4m)
- Empty Weight N/A
- Loaded Weight 28,985lbs (13,147kg)
Performance
- Power/Weight Ratio 2.481
- Horse Power/Weight Ratio 0.379
- Wing Loading 1.9lbs/ft2 (9.5kg/m2)
- Wing Area 14,872.1ft2 (1,381.7m2)
- Drag Points 177050
Parts
- Number of Parts 670
- Control Surfaces 18
- Performance Cost 2,868
I love aircarriers! I wish to see more if possible! B-)
in tirred to land lost a landing gear and a engine but still its still flying
Indeed this is.. Very fascinating... -Ba'al
@RAF1 Thank you!
@ChasingHorizon Thanks!
@CaesiciusPlanes Thanks!
@Ian1231100 Thanks!
@Somberbask @Himynameiswalrus Thanks!
Impressive part count, good job!