Okay so lets take this nice....and....easy...
First off, this took awhile figuring out the best way to take off, detach the right components and how to, and well.. I have it designed for landing on land.
1. Activates the tail fin rockets
2. Detaches tail fin rockets and the rocket on the back between the two back tail fins.
3. Activates Rocket Booster rockets
4. Detaches Boosters, Activates the three jets on the belly of the craft.
5. Activates/Deactivates the Main Wing assembly rotators.
6. Detaches the belly Rockets (I wouldn't hit until landing)
7. Nothing
8. Activates the belly side tail fin rotators (so you can land)
TO FLY
When the level loads. The craft will be sitting there. First off you need to:
1. Activate 1 and 3, Retract landing gear, and Deactivate 8.
2. Use the VTOL angels on the tail and booster jets to stabilize the craft as you ascend to the clouds.
3. When ready (best performance/ control over craft, was before hitting 60,000ft) detach Tail fin jets. Before Detaching the Tail fin jets, make sure you are moving at 60-90 degrees (horizontally), and ensure you have zero power to the engines(if you have power, the engines will crash into the craft), once you are horizontal and at zero power, press two (2).
4. When you have the craft flying at a good speed, (800-1000+MPH), press four (4) to detach Booster Jets and to Activate the three belly jets.
-Again do this horizontally and with zero power.
5. Now you are getting ready to land, IF you can align with a runway from a far. Turn on five (5) to be able to rotate the main wings. I've noticed rotating the wings slightly up and down helped with lift and pitch. Once you have the wings set to helping with your lift, and pitch up, turn off five (5) for the next step.
6. By this step, your speed should be high enough to where you can turn engine power off and click six (6) to detach the belly jets.
7. As soon as you detach the belly jets, also activate eight (8) to use the VTOL to rotate the tail fins up to land.
8. lower landing gear and touchdown.
Still workings on it PROTOTYPE.