1993 Tanaka Caribou, ready for an engine swap.
To swap an engine into the Caribou, follow these instructions:
1.) Save your favourite engine to a sub assembly.
2.) load up the Tanaka Caribou Swap-Ready
3.) Place the engine you want on FRONT of the green piece sticking out of the engine bay. Two engines, an SG25DE and an iFalco 5.0V8 (thanks to iFalco for the amazing engine) have been given if you want.
4.) Select the green piece, and set the length to 0.25
5.) Set the green piece's rise to 0
6.) Set the engine(s) to the rear wheels. If one engine block is being used, set it to both wheels, If two engine blocks are used, set one to each wheel. You may need to reverse the engine.
7.) Place the hood on and rotate to close, if possible.
8.) Upload your swap and enjoy!
Roll is steer
Brake is brake/brake lights
VTOL down to retract headlights
VTOL middle to raise headlights
(Headlights may not function depending on engine size
1 for headlights
2 for left turn signal
3 for right turn signal
4 for interior lights
Specifications
General Characteristics
- Successors 2 airplane(s) +7 bonus
- Created On iOS
- Wingspan 36.0ft (11.0m)
- Length 20.7ft (6.3m)
- Height 15.5ft (4.7m)
- Empty Weight 4,264lbs (1,934kg)
- Loaded Weight 4,427lbs (2,008kg)
Performance
- Wing Loading 24.2lbs/ft2 (118.2kg/m2)
- Wing Area 182.9ft2 (17.0m2)
- Drag Points 6048
Parts
- Number of Parts 150
- Control Surfaces 0
- Performance Cost 909
@SamReaney03 It may fit with some tweaking. Try removing the headlights and their posts to give more room.
One is I have 2 1,000 hp engines in it, another is the engine is too big for the bay... Looks like a project @Jackie
@SamReaney03 I can't guarantee all engines will fit. What problems are you having?
One of my engines doesn't fit