Socrux S.PL-100 Condor II w/ tow plane
449 SkyHunter
5.1 years ago
Auto Credit Based on FlyingHueman's Socrux S.PL-100 Condor II (+Motor Glider Variant)
I took this glider made by Flying Human and then attached a “tow rope” and Jundro’s Bush Plane. Flight controls are like normal until separation. Ag1 to release the glider (It also turns on a gyro for the Bush Plane, dont deactivate this.) Ag2 is a parachute. Bonus: Because the engine cuts out on the bush plane after separation it starts to slowly descend. This means that if you position the bush plane just right before separation that it will land itself (For best results with letting the bush plane land itself use any Final Approach Spawnpoint.) Enjoy.
Specifications
General Characteristics
- Predecessor Socrux S.PL-100 Condor II (+Motor Glider Variant)
- Created On iOS
- Wingspan 109.4ft (33.3m)
- Length 107.0ft (32.6m)
- Height 20.1ft (6.1m)
- Empty Weight 9,937lbs (4,507kg)
- Loaded Weight 10,493lbs (4,759kg)
Performance
- Horse Power/Weight Ratio 0.095
- Wing Loading 8.6lbs/ft2 (42.1kg/m2)
- Wing Area 1,217.7ft2 (113.1m2)
- Drag Points 6388
Parts
- Number of Parts 135
- Control Surfaces 9
- Performance Cost 737
I forgot to mention that you lose all control of the bus plane after separation and the glider uses the same controls as the plane. The plane is on a gyro so using the glider won’t affect it.