Auto Credit Based on FeiWu's A350 WIP v4
This is my first time trying to panel a nose, and I sucked at it. Can someone help me improve and/or add to this paneling? I will enclose some blueprint pictures.
Specifications
Spotlights
- Vidal99977 4.1 years ago
- Ren 4.1 years ago
General Characteristics
- Predecessor A350 WIP v4
- Successors 3 airplane(s) +42 bonus
- Created On iOS
- Wingspan 19.6ft (6.0m)
- Length 46.3ft (14.1m)
- Height 21.6ft (6.6m)
- Empty Weight 16,545lbs (7,505kg)
- Loaded Weight 16,545lbs (7,505kg)
Performance
- Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 17871
Parts
- Number of Parts 131
- Control Surfaces 0
- Performance Cost 316
@FeiWu ok then...
@UltraLight There has also been some drama on this site and i'm kinda in trouble rn, although I still maintain that I did it for the good of everyone. Not allowed to talk about here though. The mods have followed me and they have a record of removing my posts within minutes.
@UltraLight I have been burned out from SP now and I have abandoned this.
Any luck?
So this is the reason why modern-made plens have high part counts. It all started in the cockpit!
@LunchBox ok
@APilotOfPlanes alright, so wth this you were actually doing a really good job so far with the way you were flushing it in together with the windscreen so with the top, just keep going the way you were doing it where you would angle the fuselage, and remember that you can create circles by flipping the fuselage. And to be honest when you finish puting all of the fuselage around the windshield you should remove the piping that you put as a guide, then just round off any imperfections.
@LunchBox can you still help with this? I still have no clue about paneling
@APilotOfPlanes alright just let me know
@LunchBox I guess multiple people can try to help with this
Still need help?
The curvy windows are going to be hard, but not impossible
@SavageMan ah ok thanks
Glass? Make sure you place it horizontally and add a rotated angle, then add sections to the side
@SavageMan I did, but how do I make this complex shape found here?
@APilotOfPlanes check on my latest cessna
@SavageMan how do I make the glass look good? (paneling inside paneling)
@SavageMan ok lol
@APilotOfPlanes Keep them until you are all done. If it does look smooth enough don't worry, my first panelling attempts were not good either lol
@SavageMan and this was what I meant by the curved glass... definitely more complex than your CCX
@SavageMan I used blueprint mod, used the frames, but removed them for the screenshot
A350 and 787 are both quite easy. I’d say 737 and 747 is the hardest @Viper6
Use blueprint mod and read my tutorials... you forgot about the frames!
@Highground
how is it going?
I mean, if you can't do it, I still have to do it myself
I might be able to help