Profile image

Small and supersonic challenge

1,651 ZSRAer0naut1cs  3.5 years ago
14 downloads

This is the homebase for my challenge called The Small and Supersonic challenge,in this challenge you have to build a creation that is less than 4 blocks or 1 non-modified fuesualge block wide,Less than 8 blocks long,or 2 fuesalge blocks long,(The engine and nose count as blocks and fuesalges too!!!),Other exceptions include;Must weigh less than 10,000 pounds,Must travel at a minimum speed of Mach 2,NO XML MODIFING OR FINE TUNING!!!!.Good luck!, Due date:July 30th.

General Characteristics

  • Successors 3 airplane(s) +35 bonus
  • Created On iOS
  • Wingspan 1.6ft (0.5m)
  • Length 11.5ft (3.5m)
  • Height 3.3ft (1.0m)
  • Empty Weight 672lbs (304kg)
  • Loaded Weight 672lbs (304kg)

Performance

  • Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
  • Wing Area 0.0ft2 (0.0m2)
  • Drag Points 220

Parts

  • Number of Parts 4
  • Control Surfaces 0
  • Performance Cost 9
  • Log in to leave a comment
  • Profile image

    Update:I cut back on some restrictions,Must travel at over Mach 1
    And must weight less than 15,000 pounds.

    Pinned 3.5 years ago
  • Profile image

    @mike996 Yas

    3.5 years ago
  • Profile image
    1,259 mike996

    @ZSRAer0naut1cs . yeah so my entery is legal

    3.5 years ago
  • Profile image

    @Mike996 Yeah the measurements for this our a little werid but I allow 8 blocks and 2 fuesalge,even though they are not the same length,I’m sorry for this confusion.

    3.5 years ago
  • Profile image
    1,259 mike996

    @ZSRAer0naut1cs . a strait blok has a 1×1 dimension but only 2 go into an unedited fuselage block so my question is . is the building box for this challenge 4×8 or 2×4 ( 1 fuselage blok wide by 2 long) ?

    3.5 years ago