Auto Credit Based on RYMA232Aeronautics's RYMA Avalanche Attack
(Made way before vanilla heli parts were introduced). Original description: I spent a while on this, and it has paid off. This is a fully mechanically helicopter, and no mods were used. It is fun to fly and use. Right now it can go for a couple of minutes, but I have some versions comming up that have longer run times. VTOL Lever for prop pitch, Throttle for throttle, if you want to conserve fuel, put the throttle at around 60 percent, Use the prop trim properly, it should never go above the first notch. Have fun bois. If you want to save more fuel, set the prop pitch to throttle to, performance will not be as good though.
Specifications
Spotlights
- ThePrototype 6.5 years ago
General Characteristics
- Predecessor RYMA Avalanche Attack
- Created On iOS
- Wingspan 60.4ft (18.4m)
- Length 76.6ft (23.4m)
- Height 31.7ft (9.6m)
- Empty Weight 36,841lbs (16,710kg)
- Loaded Weight 52,207lbs (23,680kg)
Performance
- Power/Weight Ratio 2.324
- Horse Power/Weight Ratio 0.007
- Wing Loading 72.7lbs/ft2 (354.8kg/m2)
- Wing Area 718.5ft2 (66.8m2)
- Drag Points 13026
Parts
- Number of Parts 242
- Control Surfaces 0
- Performance Cost 1,656
Sorry I never responded, I wanted to keep it all unmodded, fuel is needed.@ThePrototype
It has to use fuel to power the vtol engines which power the nozzles at the end of each blade, thus driving the rotor @SnoWFLakE0s
Explain?@SnoWFLakE0s
Why does this have to use fuel? Setting input level maximum at infinity should give you infinite rotation.
Noice@darkhawk138
Great i build one like this too