No Tags
Auto Credit Based on FasterThanLight's Fixed Suspension
here is the link the problem is al follows the rear suspention is made in this way a horizontal hinge rotator (green) a beam (blue) with suspention connected to it (red) to a small rotator (purple) wich is then connected to the rear axel (orange) the problem is that by doing this on both sides it disconects one of the small rotator unless you remove the part that connects the rear axel in the middel (pink) and i have tryed a lot of things but it always comesto it that if the rear axle is not connected on both sides it works so something in the building mechanics must not allow this to work
Specifications
General Characteristics
- Predecessor Fixed Suspension
- Created On Windows
- Wingspan 13.5ft (4.1m)
- Length 27.7ft (8.4m)
- Height 11.7ft (3.6m)
- Empty Weight 16,839lbs (7,638kg)
- Loaded Weight 17,411lbs (7,897kg)
Performance
- Wing Loading 2,033.4lbs/ft2 (9,927.8kg/m2)
- Wing Area 8.6ft2 (0.8m2)
- Drag Points 12636
Parts
- Number of Parts 735
- Control Surfaces 0
- Performance Cost 2,676
