P.S.M Ver 2.0
192k Zaineman
2.3 years ago
First, Thank you to Guyfolk for the help on this build
INSTRUCTIONS
Main battery switch must be turned on or nothing will work, not even the engines
Turn on Thrust Vectoring Switch lower left arm rest
Changes in Version 2
-Enlarged both elevators as well as increasing their range of motions.
- Made both pitch and yaw tvc to be 25 degrees and 60% speed for standardization.
- Using "damperMultiplier" in all elevators and tvc rotators to eliminate the shaking, you can find "damperMultiplier" in xml.
- Edited the code in yaw tvc to a simpler code. This resulting in slower flat-spin which is easier to recover.
- Added pitot tube to the plane nose and using it as nose weight.
- Readjusted weight distribution as well as enlarged canards to make it more forgiving to fly.
- Readjusted rear landing gear position to make takeoff and landing easier.
Specifications
General Characteristics
- Created On Android
- Wingspan 31.4ft (9.6m)
- Length 42.4ft (12.9m)
- Height 10.0ft (3.1m)
- Empty Weight 11,673lbs (5,294kg)
- Loaded Weight 19,738lbs (8,953kg)
Performance
- Power/Weight Ratio 1.297
- Wing Loading 80.2lbs/ft2 (391.4kg/m2)
- Wing Area 246.2ft2 (22.9m2)
- Drag Points 3150
Parts
- Number of Parts 304
- Control Surfaces 0
- Performance Cost 3,005
@GUEVANAERONAUTICS Ok, I'm working on it now...... Need some time...maybe 15 mins
@Zaineman of course https://www.simpleplanes.com/a/B3q9X4/M-10N1-with-unperfect-psm
@GUEVANAERONAUTICS Which plane ? Shoot me a link to it and i will see what I can do k ?
hey @Zaineman can you install a psm engine in this plane? i-im not very good at building a psm and i always failed building it, so i try to ask someone instead
can you help me man?
@MrCOPTY it sounds like too much work. The reason for the VTOL Nozzles is to get the "Mach rings" I tell you what. I will involve you on my NEXT build using just simple engines and not these. The start up sequence you mentioned sounds GREAT. Please let me know about reworkable. If he really did pass away try to find out what you can. His age, where he is from, how it happened so we can create a simple planes memorial for him
@MrCOPTY Hey you dont mean literally do you ! ? ! ?
@Zaineman By The Way, @Reworkable Is Dead.
@Zaineman The Engines Base On 1 VTOL Engine, That's Me That I Need To Change Every Thing, I Need 1 Jet Engine In Each Nuzzle, Tho Make U Capable To "ON" Only One Engine (Engine 1 Or Engine 2), This Need 2 Hours And It's 21:13 GMT+1, Sorry I'm Sooo Sleepy, I have done work tomorrow, Sorry Again:Z
@Zaineman So U Want A Simple Start Up, Main Battery, Fuel Pump, Starter Selector, Starter Button.
@mrcopty , Here you go. What exactly is the plan. It goes without saying the battery switch must be flipped first then whatever startup sequence you have in mind let me know. I hope it's not too complicated because it turns some people off they get frustrated and give up. Also if you're going to add more switches either left or right there's quite a bit to that process. There's a beacon light hidden at the base of the switch that will light up upon the battery switch being flipped. Then labels that will light up based on the action of the (new switch) ("On") but at the same time they will not light up if the battery is not on