Profile image

CMR-69 Reliever Mk I

6,478 AnOlympicWalnut  6.3 years ago
Auto Credit Based on AnOlympicWalnut's EX-32 LAS

The CMR-69 Reliever is an All-Terrain Search and Rescue vehicle designed to provide Recon and Rescue people like Hikers, climbers, etc. It's meant to rescue someone regardless if they're on an island, cliffside, or even the top of a volcano! This vehicle HAS landed in all kinds of areas, so you should be just fine.

Warnings: 1. DO NOT fly recklessly in the aircraft, since it's not meant for sporadic movements. 2. DO NOT land on water above 300 mph. There is a high risk of tipping over.

Instructions: 1. The VTOL slider is used for Roll trimming. 2. The Trim Slider is used for Pitch trimming and extra takeoff power if needed. 3. Other Mechanics should be just fine.

Additional Information 1. The canopy separated from the front cockpit seats 3 Passengers. 2. The intake on the front is meant for taking in water, filtering it to clean water, and transported to any passengers in the back in case they need to drink. When in flight, the intake can provide cooling inside. 3. The wings hit by the jet flame are stainless steel. No need to worry about melting anything! 4. Top speed is 100-160 mph on water, 340-380 mph in flight, and 336 mph on the ground!

As Hurricane Florence heads my way, I hope you guys enjoy this rescue vehicle! Also, try testing it in Hurricane Florence wind settings! But now, without further ado, enjoy!

General Characteristics

  • Predecessor EX-32 LAS
  • Created On Windows
  • Wingspan 19.6ft (6.0m)
  • Length 27.9ft (8.5m)
  • Height 12.7ft (3.9m)
  • Empty Weight 4,718lbs (2,140kg)
  • Loaded Weight 6,235lbs (2,828kg)

Performance

  • Power/Weight Ratio 1.081
  • Wing Loading 39.1lbs/ft2 (190.9kg/m2)
  • Wing Area 159.4ft2 (14.8m2)
  • Drag Points 3905

Parts

  • Number of Parts 69
  • Control Surfaces 5
  • Performance Cost 465