Please Help
848 AdmiralCrab
4.6 years ago
I am trying to make a vtol sphere and I am using this box as the basis that holds the landing gear on. I would like some help with making the thing actually work instead of uncontrollably spinning. 1 Is VTOL gyro and 2 is main engines.
Specifications
General Characteristics
- Created On iOS
- Wingspan 11.3ft (3.4m)
- Length 10.2ft (3.1m)
- Height 7.2ft (2.2m)
- Empty Weight N/A
- Loaded Weight 15,631lbs (7,090kg)
Performance
- Power/Weight Ratio 1.293
- Wing Loading 57.4lbs/ft2 (280.5kg/m2)
- Wing Area 272.1ft2 (25.3m2)
- Drag Points 0
Parts
- Number of Parts 54
- Control Surfaces 7
- Performance Cost 259
Thank you so much!
Actually, forget everything I said below,
here’s another better version, lol
Also it might be ideal to rotate the landing gear downward and set the rotator inputs to (1*LandingGear) so that they start down
And if you find the ‘ground effect’ too jittery, try this instead!
How’s this? VTOL for VTOL and Throttle for forward speed, also added brake and some ground effect that gives you extra lift close to the ground; I assumed this will just be the inside to what you’re making so I removed a few things, it will help to make sure everything you add from here on in is 0 mass, hope this helps!