this took me a little longer to make than the last f1 car that I made because the last one was a replica and this is my own design plus every part has been altered using overload. it is a little slower than the other car but can turn on a DIME when compared to the other one. personally, the hardest part to make was the active aero because I didn't want the car to stick to the ground turning one way and taking off on another. the last part is I have never reached its top speed of 2600 mph due to drag, but 218 mph is good enough.
Specifications
Spotlights
- DemonSniper8 6.8 years ago
General Characteristics
- Successors 1 airplane(s) +14 bonus
- Created On Android
- Wingspan 9.0ft (2.8m)
- Length 19.3ft (5.9m)
- Height 3.9ft (1.2m)
- Empty Weight 330lbs (150kg)
- Loaded Weight 330lbs (150kg)
Performance
- Wing Loading 5.6lbs/ft2 (27.3kg/m2)
- Wing Area 59.2ft2 (5.5m2)
- Drag Points 1672
Parts
- Number of Parts 71
- Control Surfaces 0
- Performance Cost 357
I meant without any means of assistive propulsion (jets,propellers,etc)
AND... aerodynamic drag is the fluid drag force that acts on any moving solid body in the direction of the fluid freestream flow. From the body's perspective (near-field approach), the drag results from forces due to pressure distributions over the body surface, which is a result of viscosity. Alternatively, calculated from the flowfield perspective (far-field approach), the drag force results from three natural phenomena: shock waves, vortex sheet, and viscosity.
How do u know the top speed is 2600mph?
And drag means nothing to me