No Tags
uh im trying to get my silver build finished but i could not as the suspension is not working properly ive tried fixing it for quite a while but have no idea why please help me fix this problem by telling me on the comments down below or download and fix and then share with me.
if you have helped me with it i will credit you in the final post also
Specifications
General Characteristics
- Created On Mac
- Wingspan 11.5ft (3.5m)
- Length 16.7ft (5.1m)
- Height 9.1ft (2.8m)
- Empty Weight 9,291lbs (4,214kg)
- Loaded Weight 10,018lbs (4,544kg)
Performance
- Wing Loading N/A
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 6145
Parts
- Number of Parts 48
- Control Surfaces 0
- Performance Cost 367
@Marcochoy2007 I can offer a help - my torsion from the tank.
https://www.simpleplanes.com/a/8Lv1EP/Aircraft
Yes, it looks bad, but it works...
still not working mate :( ugh@Amazjul
still didnt work idk why
Ok so you have an upper and lower control arm like you’d find on many front ends, but the issue you have is the upper and lower control arms and the shock is moving together. On a car you’ll find the shock is connected to the LCA but then mounted solid on the top. Sometimes in a strut tower, sometimes there is a plate in the UCA that it bolts to.
If you were to make the UCA solid, or remove it completely, your design would work, and would be like a McPherson strut front end design which 90% of all modern cars now have.
Good work though, you did a great job.