cleaver chopper
15 justwingwithit
7.1 years ago
With the gyroscope update and the damage control updates, I have finally made a helicopter/ jet. To take off, set throttle to under 40% and press act 2 to detach pads. you can use the yaw and roll to strafe and maneuver . if you want the jet mode, pitch down and set VTOL down. Set the VTOL up to initiate e-brakes, but only for a second because the plane will lose control quickly. If you want to set it right, press act 8 to deactivate the gyro and set VTOLdown.. When landing, set throttle to 9-11% for maximized stability, and make sure the gyro is on for full support. I hope you enjoy.
Specifications
General Characteristics
- Created On Android
- Wingspan 20.9ft (6.4m)
- Length 22.8ft (7.0m)
- Height 10.7ft (3.3m)
- Empty Weight 11,445lbs (5,191kg)
- Loaded Weight 13,930lbs (6,318kg)
Performance
- Power/Weight Ratio 1.935
- Horse Power/Weight Ratio 0.035
- Wing Loading 175.6lbs/ft2 (857.6kg/m2)
- Wing Area 79.3ft2 (7.4m2)
- Drag Points 3660
Parts
- Number of Parts 53
- Control Surfaces 6
- Performance Cost 246
I used VTOL simply because the rotor wasn't powerful enough to lift the weight. What could I do?
OH, and act one for the cleavers