Auto Credit Based on callmom1's Mirage Inspired Delta Wing Prototype
The American made F33 Albert is based off of the famed mirage iii but is equipped with a 32,000 lb thrust engine and special high energery dense fuel to increase range. The f33 only weighs 10000 pounds wet giving it an impressive 3.0+ thrust to weight ratio; combined with the forward mounted air brakes (vtol slider), the f33 is capable of extremly high g and high aoa manuevers.
Specifications
Spotlights
- BeastHunter 3.4 years ago
General Characteristics
- Predecessor Mirage Inspired Delta Wing Prototype
- Successors 1 airplane(s)
- Created On iOS
- Wingspan 21.1ft (6.4m)
- Length 35.4ft (10.8m)
- Height 12.4ft (3.8m)
- Empty Weight 6,621lbs (3,003kg)
- Loaded Weight 10,002lbs (4,537kg)
Performance
- Power/Weight Ratio 3.37
- Wing Loading 46.1lbs/ft2 (225.3kg/m2)
- Wing Area 216.8ft2 (20.1m2)
- Drag Points 770
Parts
- Number of Parts 46
- Control Surfaces 5
- Performance Cost 283
@callmom1 Thanks, I uploaded it, check it out
@zzzMEOWzzz go to the menu in the builder and press share aircraft at the top
bro can you tell how to upload my f16 pls
@callmom1 hi I converted your plane into an f16 lol check it is really nice
albert
@circlesquare56 @Yuhengsong I did not use any fancy fins or a gyroscope. The only xml files I changed were the mid section of the body that overlaps so it isn’t heavier than it should be. I did cheat a little by adding fuel to the middl section pieces which only had .2 mass but I explained it as “high energetic density” fuel. The center of lift and mass are placed in the right position relative to eachother and I made the wind in multiple pieces to ensure the game would identify a lifting wing and a wing that I want to have control surfaces on. So basically it’s like a normal plane but the wings are just merged together into a big delta wing.
@Yuhengsong when i first made the plane, the nose dipped down very hard even though it felt great to fly. I switched the front wings to flat bottom instead of symmetrical and then it made enough lift to fly perfectly stable. I didn’t expect it to fly so good but I think the extremely low weight and size, large engine and tail fin, plus the balanced lift with flat and semi symmetrical wings; it is able to fly so well.
You have to put horizontal stabilizers in the far back and size them down with fine tuner, 0,0,0. That’s how I did mine @Yuhengsong
@Yuhengsong You are very nice, thank you. This was the first delta wing plane I made and I based it off of the mirage fighter jet.
Lol that looks just like mine. But with a different cockpit
Did you use a gyroscope?Why can it be so stable.It's amazing
unbelievable，I didn't use XML，The plane is great