The F23 Sparrowhawk is the latest high-speed UAV I've built. It has good

high-speed and low-speed maneuverability, and is equipped with three-dimensional vector engine, which can carry out stall maneuvering.

AG1:Cigarette puller

AG8:lighting

The development process of this aircraft is quite long, which was interrupted several times due to my personal reasons. My research and development goal is to produce an aircraft with stall maneuverability and good high-speed maneuverability. And decided to make it look like a small UAV.

The maximum design speed of this aircraft exceeded Mach 2, carrying a total of 8 air-to-air missiles. I also customized a brand-new vector engine for this aircraft, which is more advanced than the technology I used in the past. This is probably the best stall maneuver experience I've ever made.

Despite several modifications, the plane has some design flaws. Because of its good maneuverability, the plane may tumble out of control in the air and crash during takeoff. In addition, in order to make it easy for this aircraft to make stall maneuver, the stall speed of this aircraft is relatively high compared with other works of mine. This increases the probability of crashing at low altitude. In addition, the thrust to weight ratio of this aircraft is not particularly high, so it may not have time to accelerate during low altitude stall maneuver, resulting in the aircraft hitting the ground.

This aircraft is equipped with pl-10 and pl-15 air-to-air missiles that I imitated. These missiles are the main combat weapons of this aircraft. Some of them are also equipped with proximity fuzes and built-in bombs to enhance its power. However, the disadvantage is that these missiles are relatively heavy, which will reduce the maneuverability of the aircraft.

That's all I have to say about this plane. If you have any questions about the plane, you can ask me in the comments section. If you think I'm doing well, I hope you can give me support. All in all, have a good time.