Profile image

Fixed

4,054 JSTQ  6 months ago
197 downloads
Auto Credit Based on GeneralCorpInc's Hilp...

First install normal wings like making an airplane, and then shrink and hide them.

The biggest problem with your missile is that the wing area is too small, the lift is insufficient, and it cannot be controlled. I can easily solve this problem using my method.

I have modified the launch process of this missile. Now you can first set up the launch rack according to AG1, and then directly select the missile from the weapons to launch. The principle is to start the missile by judging the rotation angle of the shaft (whether it is less than -89 degrees), and then determining whether the number of weapons is zero. The weapons used for judgment need to be stored separately. You can observe the revised versions I will release later to deepen your understanding.

I also installed a camera to help you aim better

General Characteristics

  • Predecessor Hilp...
  • Created On Android
  • Wingspan 13.7ft (4.2m)
  • Length 51.7ft (15.8m)
  • Height 20.4ft (6.2m)
  • Empty Weight 6,928lbs (3,142kg)
  • Loaded Weight 8,798lbs (3,990kg)

Performance

  • Power/Weight Ratio 11.494
  • Wing Loading 36.8lbs/ft2 (179.9kg/m2)
  • Wing Area 238.8ft2 (22.2m2)
  • Drag Points 13685

Parts

  • Number of Parts 83
  • Control Surfaces 6
  • Performance Cost 658
  • Log in to leave a comment
  • Profile image
    4,054 JSTQ

    @GeneralCorpInc Sorry bro, I just realized that if the two shafts of the launcher have different speeds, there may be an explosion when they are folded up. I suggest changing its speed to 30% to 40% at the same time

    Pinned 6 months ago
  • Profile image

    Oh a rocket

    6 months ago
  • Profile image
    4,054 JSTQ

    @GeneralCorpInc Due to the special launch process, you cannot retract the launch rack before the missile explodes, otherwise it will cause the missile engine to shut down

    6 months ago
  • Profile image

    Thx a lot.

    6 months ago
  • Profile image
    4,054 JSTQ

    @GeneralCorpInc

    6 months ago