Profile image

Ryan ST

177k QuiteInactiveWhiteBread  3.3 years ago
397 downloads

Welcome!

Controls
VTOL - flaps

Wikipedia
The Ryan STs were a series of two seat, low-wing monoplane aircraft built in the United States by the Ryan Aeronautical Company. They were used as sport aircraft, as well as trainers by flying schools and the militaries of several countries.
T. Claude Ryan was the founder of the Ryan Aeronautical Company, the second incarnation of a company with this name, and the fourth company with which he had been involved to bear his name[1] (the first, Ryan Airlines, was the manufacturer of the Ryan NYP, more famously known as the Spirit of St. Louis). He began the development of the ST (for "Sport Trainer", and also known as S-T),[2] the first design of the company, in 1933.[3]

The ST featured two open cockpits in tandem in a semi-monocoque metal fuselage of two main frames – one steel, the other half of steel and half of aluminium alloy (alclad) – to take the loads from the wing spars and six more alclad frames; and alclad skin.[4] It had wings in three sections of hybrid construction; the center section integral with the fuselage had tubular steel spars, the front spar a simple tube with an external brace to the upper fuselage, and the rear spar in the form of a parallel chord truss.[4] The two outer wing panels had wooden spars and alclad ribs, with diagonal rods bracing the wings internally. Alclad sheet was used to form the leading edges, and fabric covered the whole structure. When attached, the outer wings were braced with flying wires to the fixed conventional landing gear and landing wires to the upper fuselage.[4]

Five STs were built, each powered with a 95HP Menasco B4 engine [5] before the follow-on ST-A (A for Aerobatic) was developed with a more powerful 125HP Menasco C4 engine. A single ST-B was produced, this being an ST-A with only one seat and an extra fuel tank where the front cockpit normally was; this aircraft was subsequently converted back to ST-A standard.[6] The ST-A was further developed as the ST-A Special, with a super-charged 150HP Menasco C4-S engine of increased power.

Photos


Diloph

-bigchunguss

General Characteristics

  • Created On iOS
  • Wingspan 48.2ft (14.7m)
  • Length 35.5ft (10.8m)
  • Height 15.5ft (4.7m)
  • Empty Weight 5,403lbs (2,451kg)
  • Loaded Weight 10,708lbs (4,857kg)

Performance

  • Horse Power/Weight Ratio 0.233
  • Wing Loading 23.9lbs/ft2 (116.5kg/m2)
  • Wing Area 448.6ft2 (41.7m2)
  • Drag Points 3398

Parts

  • Number of Parts 327
  • Control Surfaces 5
  • Performance Cost 1,117