No description.
Specifications
General Characteristics
- Created On Android
- Wingspan 56.4ft (17.2m)
- Length 82.5ft (25.1m)
- Height 22.9ft (7.0m)
- Empty Weight N/A
- Loaded Weight 9,954lbs (4,515kg)
Performance
- Power/Weight Ratio 2.257
- Wing Loading 6.4lbs/ft2 (31.2kg/m2)
- Wing Area 1,556.7ft2 (144.6m2)
- Drag Points 5731
Parts
- Number of Parts 205
- Control Surfaces 7
- Performance Cost 873
@ChickenMan0008 np!
@2008abdupro Thanks It took me a while to figure it out But i got it! Now if only my plane can actually fly.
@ChickenMan0008 to take that "hud" away, you have to press the setting thing 5 times again till it says "dev console disabled" and that's all :)
@ChickenMan0008 When you are at your build, you will press the "eye" icon and then tap the blueprint icon. After that you will see "top","side","front". You will press "front". Once you press that you will press "open image" (from ur gallery) and you must see your screenshot. Ince you get your screenshot shown you will press "upload aircraft" and take a picture of the cool screenshot and others normal then you can upload your aircraft with a nice pic.
@ChickenMan0008 Once you type that in you will see execute and will tap that. You will notice everything disappear. (The menu buttons and ag's and etc). Then take a good screenshot of the aircraft, then you will press the menu button (but since it is invisible, you will have to remember where it was and the exit button).
@ChickenMan0008 Well first of all go to simpleplanes, then go to settings. There will be the word "settings" again and you will have to tap it 5 times until it says " dev console enabled". After that you go to your build, load it to play. Pick a position for your aircraft and tap the screen with your 3 fingers ( 3 at the same time). You will see something come up and will have to type in //maincamera>camera.set_depth 10
How Do you make Thumbnails like that?