RD-1 Stunt Plane
2,174 Random40
4.8 years ago
This is an aircraft that I just made when I was bored, but it turned out ok, so I decided to post it. I call it the Random RD-1. It started out as a ww2 style trainer, but I turned it into a stunt plane later.
Controls
Normal airplane controls
VTOL=Flaps
Act-1=Smoke
Act-2=Drop the smoke pods
If you fire the rockets after starting the smoke, the smoke gets thicker.
Takeoff
Use full throttle and once the tail comes up then pull up.
Landing
Line up on the runway and lower throttle to between 10 and 20 percent. Once above the runway, cut the throttle and put the plane on the ground lightly. You can use brakes the whole time and the plane shouldn’t flip over.
Notes
This plane should stall around 60 mph.
The flaps are technically flaperons…
Screenshots (these are the same ones from the teaser)
Specifications
General Characteristics
- Successors 1 airplane(s) +7 bonus
- Created On iOS
- Wingspan 35.2ft (10.7m)
- Length 23.9ft (7.3m)
- Height 11.8ft (3.6m)
- Empty Weight 3,211lbs (1,456kg)
- Loaded Weight 3,760lbs (1,705kg)
Performance
- Horse Power/Weight Ratio 0.531
- Wing Loading 18.9lbs/ft2 (92.2kg/m2)
- Wing Area 199.2ft2 (18.5m2)
- Drag Points 3633
Parts
- Number of Parts 74
- Control Surfaces 5
- Performance Cost 415
Very nice. It has a very nice simplistic look to it.@Random40
@Random40 np.
@MrPorg137 thanks!
@Random40 Very cool!
@RailfanEthan
@Strikefighter04
@edensk
@Wi1dSk7
@MrPorg137
@CrashFighter05