Specifications
General Characteristics
- Created On Windows
- Wingspan 65.4ft (19.9m)
- Length 56.2ft (17.1m)
- Height 26.5ft (8.1m)
- Empty Weight 25,508lbs (11,570kg)
- Loaded Weight 34,537lbs (15,666kg)
Performance
- Horse Power/Weight Ratio 0.173
- Wing Loading 27.1lbs/ft2 (132.5kg/m2)
- Wing Area 1,272.5ft2 (118.2m2)
- Drag Points 13859
Parts
- Number of Parts 134
- Control Surfaces 5
- Performance Cost 509
@Trijets ok I will try
@AviownCorp I did that on purpose, but if you think it might solve problems with how my plane flies, please tell me.
Nose cone
@Trijets I put side ways vtol jets and made them activate on roll, I put the main turbine to power the jets in the bridge and put the inlet on top of the bridge. MAKE SURE IF U USE THIS DESINE THE JETS ARE PLACED IN THE CENTER OF MASS (CoM) so it doesn’t fly around. If you are confused just download my boat and look at it.
@ACEPILOT109 How did you propel the boat, and make it turn?
I saw you comment about how I made that Uboat and I was wondering what u needed to know
@Chucko12 Okay, sounds good
The back edge of the rudder. It works better if perpendicular to the ground. @Trijets
@Chucko12 But can you please explain to me what you mean by straight trailing edge?
@Chucko12 thanks for the feedback!
@Trijets I would try making the fuselage longer and giving the rudder a larger control surface and a straight trailing edge.
@Chucko12 I basically put nothing in the nose. I think it is eiter the cockpit, or something i dont know of, but the plane flies better above 200 knots. If you have any input on making my plane better, please tell me, and thanks for the feedback!
The airplane has too much nose weight, too much roll, and literally no rudder authority. The interior is cool tho
@ACEPILOT109 I know, I was trying to give the airplane a "different" look.
The nose needs a nose cone