THIS AIRCRAFT WAS SPECIALLY DESIGNED TO BE CONTROLLED BY ARTIFICIAL INTELLIGENCE.
can also be piloted by players
AG-8 Enable/Disable Lights
The Cessna 172 Skyhawk is an American four-seat, single-engine, high wing, fixed-wing aircraft made by the Cessna Aircraft Company. First flown in 1955, more 172s have been built than any other aircraft. It was developed from the 1948 Cessna 170 but with tricycle landing gear rather than conventional landing gear. The Skyhawk name was originally used for a trim package, but was later applied to all standard-production 172 aircraft, while some upgraded versions were marketed as the Cutlass.
Can Operate in Airports of: Wright, Yeager and Bandit
two brothers flying
Enjoy yourself!
Specifications
Spotlights
- Sakorsky 2.2 years ago
- RobertsAeronautics 2.2 years ago
- CAVIM 2.2 years ago
General Characteristics
- Successors 3 airplane(s) +28 bonus
- Created On Android
- Wingspan 40.7ft (12.4m)
- Length 29.6ft (9.0m)
- Height 13.8ft (4.2m)
- Empty Weight 2,456lbs (1,114kg)
- Loaded Weight 4,213lbs (1,911kg)
Performance
- Horse Power/Weight Ratio 0.166
- Wing Loading 18.1lbs/ft2 (88.6kg/m2)
- Wing Area 232.3ft2 (21.6m2)
- Drag Points 1151
Parts
- Number of Parts 85
- Control Surfaces 5
- Performance Cost 338
I Can't Believe The Cessna Squadron Had More Downloads
@JacksEpicGamingYT wow one day i get there
@MAPA I Love It ! Thanks
@OkaNieba he is ready
Thank you all for the positive upvotes :D
@OkaNieba Apparently they are completely identical aircraft, the only difference I found in the SR22 Turbo is its more powerful 4-blade engine, but I'll see what I can do to make the SR22Turbo more attractive
Btw Can You Make SR22T ?
@MAPA damn The Cessna 172 was made
@EternalDarkness Thanks for the tip, I had to sacrifice the flaps because of the high amount of wings, I can't put more than 6, so I resorted to using the fuselage. more now with this technique I will improve my cessnas 172/182. other than that all my other aircraft follow the same wing pattern as my SR22
Nice upgrade to the landing gear.
I advise against covering wings with fuselage blocks like that. Control surfaces clipping through is considered more of a noob move than naked wings. You can experiment with one of many custom wing techniques that actually give good looking wings. here's mine.
Custom wings still need wing parts inside them. Control surfaces on them are usually done with hinges moving a sculpted fuselage piece with a small wing hidden inside it, or by having custom surfaces empty and using stock control surfaces.
If you go with stock control surfaces on hidden wings, scale the wing thinner so control surfaces move less and don't clip out of the custom wing body.
sorry for the delay, I'm renovating the landing gear of all my planes