Alright, so this is supposed to be able to take off and then the rear props rotate to face forwards. The design is kinda based off a berg (Maze Runner Helicopter) but with some variation. My current issue is that the props overspeed at like 3% throttle. I can’t for the life of me figure it out. A few basics though, id like for the front props to stay roughly the same size and the back props must be able to rotate. Otherwise, change it as needed so that it works. I will mention and upvote graciously in return. Thanks!
Specifications
General Characteristics
- Created On iOS
- Wingspan 63.4ft (19.3m)
- Length 50.7ft (15.5m)
- Height 10.4ft (3.2m)
- Empty Weight 15,110lbs (6,854kg)
- Loaded Weight 30,423lbs (13,799kg)
Performance
- Power/Weight Ratio 31.024
- Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 14171
Parts
- Number of Parts 41
- Control Surfaces 0
- Performance Cost 1,112
@NovaWolf No problem man
Alright thanks@Buzzshot
So when throttle is at 5% the props will turn on
@NovaWolf witch would probably around 5%.
@NovaWolf just turn it on and put "engage at" at lowest setting above 0
Hmm, I guess I’ll have to find a work around. What would I set the governor to?@Buzzshot
@NovaWolf the only compromise is it won't get off the ground with sold prop power. I'd reccomend using some kind of VTOL to get it in the air
@NovaWolf The reason they were overspending was because there was no throttle govner which keeps it from overspending