This might be the final product but if you like it and comment i will try to improve it. This is the best i can do for now because it is hard to make a rotor wing aircraft and specially if you want to fly it like a plane. It can be challanging to fly so i will teach you how to do it now. Start by activating group 6 that will start the gyro then you can throttle up i racomend around 66% if you want to fly up slowly. If you want to fly normaly you should slowly bring the vtol slider up and around when its up you should de-activate group 6 and pull up so that the plane doesent dive. i also highly recomend that you use tril so that it doesent start a deep dive but keep in mind that it will still dive slightly. Thanks for downloading.
Specifications
General Characteristics
- Created On Android
- Wingspan 61.1ft (18.6m)
- Length 45.4ft (13.8m)
- Height 15.4ft (4.7m)
- Empty Weight 16,757lbs (7,600kg)
- Loaded Weight 18,529lbs (8,404kg)
Performance
- Horse Power/Weight Ratio 0.269
- Wing Loading 60.6lbs/ft2 (295.7kg/m2)
- Wing Area 305.9ft2 (28.4m2)
- Drag Points 14981
Parts
- Number of Parts 106
- Control Surfaces 12
- Performance Cost 503
I have a tilt rotor I built and it worked fine with the COM and COT together. Here's the link:
https://www.simpleplanes.com/a/xqPY6e/Tilt-Rotor
You don't have to download it, but you can if you want (I'm not trying to self advertise) @Minecraftpoweer
oh...
@Zoomzoom999 It doesn't help.
@Zoomzoom999 yes i know i will try and see if it will improve it.
That's how you can move the COM w/o changing the details @Minecraftpoweer
You can adjust the COM by adjusting the weight @Minecraftpoweer
@Zoomzoom999 Yes but i didn't want to change anything because of all my modifying of the plane this was the best.
Try lining the y-axis of the COM w/ the COT. After doing this, test its performance by taking off, flying level, and landing.
@Minecraftpoweer