Profile image

Avatar entry vehicle

1,679 Renaissance6101856  7.8 years ago

read all of this this is an exact replica all of the reentry vehicle from the movie Avatar but before you jump in the cockpit you must know how to fly it a basic take off begins with throttling up to Max pushing the trim all the way down and pressing 2 to start the engine taking off the VTOL is a little bit harder first you want to put your trim all the way down put the VTOL slider all the way down throttle up to a little bit over 50% press one to start the engines in the air pull back but not too much make sure you are still nosing forward do not go over 30 degrees down after a decent speed return to level flight and slowly push the VTOL slider to neutral main stable the whole time even though this part can get very shaky counteract the roll you are experiencing finally after in level flight press one to turn off the engines and 2 to start the primary cruising engines throttle up to Max and have fun one piece of advice I could give you is while doing any type of maneuver keep your finger study on the controls or else you may still easily

Spotlights

General Characteristics

  • Created On Android
  • Wingspan 68.6ft (20.9m)
  • Length 75.3ft (23.0m)
  • Height 19.5ft (5.9m)
  • Empty Weight 179,312lbs (81,334kg)
  • Loaded Weight 188,180lbs (85,357kg)

Performance

  • Power/Weight Ratio 0.143
  • Wing Loading 100.2lbs/ft2 (489.3kg/m2)
  • Wing Area 1,877.7ft2 (174.4m2)
  • Drag Points 20582

Parts

  • Number of Parts 197
  • Control Surfaces 8
  • Performance Cost 1,094