Profile image

Help

142 JoFerl  4.0 years ago

Can someone please tell me what's wrong with my Jet? it fly's ridiculous and uncontrollable. Please give it a try and leave a comment below of what's wrong with this jet (>_<)

General Characteristics

  • Successors 1 airplane(s) +7 bonus
  • Created On Android
  • Wingspan 32.0ft (9.7m)
  • Length 28.4ft (8.7m)
  • Height 11.3ft (3.4m)
  • Empty Weight 4,362lbs (1,978kg)
  • Loaded Weight 6,494lbs (2,945kg)

Performance

  • Power/Weight Ratio 0.519
  • Wing Loading 24.5lbs/ft2 (119.5kg/m2)
  • Wing Area 265.4ft2 (24.7m2)
  • Drag Points 1762

Parts

  • Number of Parts 33
  • Control Surfaces 5
  • Performance Cost 212
  • Log in to leave a comment
  • Profile image
    549 Mitchel59

    @JoFerl I remade it well built a newer one from scratch! And I hope you like it! Give it a try you will love it

    Pinned 4.0 years ago
  • Profile image
    36.1k Icey21

    Its too high from the ground the landing gear is too tall if you want to use that landing gear your aircraft has to be taller and longer but for this aircraft you need to use smaller landing gear the nose is pointed up too much but that gives me the thought you cane use fine tuner to put the landing gear further in the plane also try to put the wings near the inlet or on the inlets level 😀

    Pinned 4.0 years ago
  • Profile image
    3,214 Chrisk1993

    @LeonardorHD1 Naw it doesn't matter where any of those are in the vertical axis. It's where they are along the length of the plane. And CoT doesn't matter except in very extreme circumstances.

    Pinned 4.0 years ago
  • Profile image
    15.1k DEN12345

    idk why... i'm removed a fuel from the main wings. And set semi-symmetry all over the main wing.

    It flies normally. Even without changes.

    Pinned 4.0 years ago
  • Profile image
    549 Mitchel59

    Roger that @JoFerl

    Pinned 4.0 years ago
  • Profile image
    549 Mitchel59

    I can rebuild a better version of this plane for you

    Pinned 4.0 years ago
  • Profile image
    1,104 LeonardorHD1

    It because your center of mass lift and trhust are missaligned trhust should be at the same level as center of mass and lift should be little above the center of mass but generally on the same place

    Pinned 4.0 years ago
  • Profile image
    142 JoFerl

    @Mitchel59 I will glad to see it XD

    4.0 years ago
  • Profile image
    142 JoFerl

    @LeonardorHD1 Thanks!

    4.0 years ago