Auto Credit Based on TTHHSSSS's |**CLOSED**|STOL CHALLENGE!
This is my entry for the STOL challenge. I had a bit of trouble with the successor part of it so I re-uploaded it. What happen d was I had uploaded the plane before but once I had uploaded it I noticed the "Must be a successor" thing. So my plan was to remove the aeroplane and turn it into a sub assembly and download tthe challenge and get rid of the letters and get the plane back out, reset the colours and upload it again. It worked!
Stall speed is about 50mph. Best low speed stability is without trim. The stall speed is the same with or without trim.
1.5 is out! Yay!
Enjoy!
Specifications
General Characteristics
- Predecessor |**CLOSED**|STOL CHALLENGE!
- Created On iOS
- Wingspan 30.9ft (9.4m)
- Length 22.9ft (7.0m)
- Height 9.0ft (2.7m)
- Empty Weight 2,459lbs (1,115kg)
- Loaded Weight 2,832lbs (1,284kg)
Performance
- Horse Power/Weight Ratio 0.264
- Wing Loading 9.5lbs/ft2 (46.5kg/m2)
- Wing Area 297.3ft2 (27.6m2)
- Drag Points 2418
Parts
- Number of Parts 76
- Control Surfaces 12
- Performance Cost 360
@jamesPLANESii oh, welcome
Thanks! @MAHADI
cool design...
Now, I am following you...
Ok. @RMark1
Oh ok. @RMark1
That's quite a lot too much for my iPad. My iPad can only handle at the most 170. Every thing above that my iPad crashes several times on uploading. @RMark1
That might be too simple. When doing collabs, you kinda need to do things like big, heavy, replica bombers and stuff. @RMark1
Oh. Yes. You start or there's a very high chance that I wish take over. It happens at school as well. 😀 @RMark1
You're welcome! @TTHHSSSS
Awesome! Thanks for the entry!
Thanks @rubbishcraft
@TTHHSSSS